Fox 36 Factory FIT4 Suspension Fork

Features

• Updated crown design improves durability while maintaining stiffness, increasing steer-tube overlap at the crown-steerer unit and dropping 20 g of weight
• FIT4 closed cartridge damping system provides 3 on-the-fly compression damping positions—open, medium and firm—to adapt to varying trail conditions
• Factory Series forks feature an additional 22 clicks of low-speed compression adjust in the open mode, allowing riders to fine-tune their exact damping preferences
• Lower leg bypass channels allow for increased air volume, reducing the amount of additional unintended pressure ramping
• Lower leg bath oil circulates to the upper reaches of the legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel
• Lower leg bleeders allow for atmospheric pressure equalization, allowing for full travel while increasing responsiveness and sensitivity to small bumps
• Lower leg arch design shaves weight without compromising the stiffness or strength requirements that modern enduro and gravity-style riding demand
• FLOAT EVOL air spring optimizes small bump sensitivity by increasing negative air-spring volume
• FLOAT EVOL has a linear spring curve that delivers plushness off the top, extra mid-stroke support and more tunable bottom-out progression
• Genuine Kashima Coating on upper tubes, which reduces friction and increases wear life

Imported.

Important WARNING for California residents View all Fox Bike Suspension Forks

Technical Specs

Best Use

Fork Spring Type

Fork Brake Type

Fork Brake Mount

Max Rotor Diameter

Crown Race Diameter

Stanchion Diameter

Steerer Tube Diameter

Steerer Tube Length

Axle to Crown Length

Max Tire Width

Wheel Size

Fork Travel

Fork Offset

Front Axle

Weight

Material(s)

Mountain Biking

Air Spring

Disc Brake

Post Mount

230 millimeters

40 millimeters

36 millimeters

1.5 in. Tapered

264 millimeters

554 millimeters

72 millimeters

27.5 inches

160 millimeters

44 millimeters

15 x 110 mm Thru-Axle (Boost)

Unavailable

Kashima coated aluminum